A manual transmission should feel “mechanical” in the right way: a clean engagement, a confident gate, a smooth rotation without harsh vibration. This unit is designed to bring that sensation back to Geely GX7 drivetrains by focusing on the fundamentals B2B customers care about—fitment discipline, durability under real road loads, and stable shifting characteristics across daily stop-and-go and highway cruising.
From the first turn of the input shaft, a good gearbox has a certain tactile signature: rotation that feels even and controlled, not rough or inconsistent. That matters because the earliest signs of internal wear often show up as subtle drag, heat, or noise. A replacement transmission that restores smoothness does more than “work”—it reduces the risk of secondary failures (clutch stress, driver over-force, abnormal wear) and protects your reputation as a supplier or installer. This is why we treat a gearbox as a precision drivetrain assembly, not just a metal casing filled with gears.
Application-focused compatibility: Built for Geely GX7 fitment, aligned to S148 / S160G / S160 transmission codes to reduce mismatch risk.
Shift feel you can sense: Designed to restore crisp engagement and stable synchronization, supporting smoother gear changes and reduced shift hesitation.
Durability under load: Suitable for daily driving stress cycles—frequent starts, climbs, and variable torque demand—helping extend service intervals.
Noise and vibration control mindset: Built to support controlled operation that helps minimize abnormal drivetrain noise and harshness after installation.
B2B-friendly supply approach: Supports wholesalers, repair networks, and importers that need consistent batches, packaging stability, and clear identification.
Selecting a manual transmission is not just “vehicle model + year.” In B2B purchasing, most returns and disputes come from incomplete fitment confirmation. To protect your order accuracy, we recommend validating the following before shipment:
Transmission code confirmation
Confirm the vehicle uses S148, S160G, or S160 configuration.
Cross-check the gearbox identification area or the service documentation used by your workshop network.
Vehicle platform check
Confirm the application is Geely GX7 and note any market-specific variations that may affect mounting points or linkage interfaces.
Installation system compatibility
Ensure linkage, mounts, clutch system components, and driveshaft interfaces are consistent with the removed unit.
If your buyer is a workshop chain, standardize a short “pre-check list” to reduce inconsistent field verification.
Why this matters to you: Every avoided mismatch saves shipping cost, admin time, and customer friction. In many markets, preventing just one incorrect shipment pays for a full round of fitment validation.
A gearbox is trusted when it behaves consistently, not only on day one, but after the first heat cycles and real torque loading. For B2B buyers, “quality” is measurable in reduced warranty claims, fewer noise complaints, and stable shifting over time. Our quality mindset focuses on three practical outcomes:
Operational consistency
Smooth rotation characteristics and stable engagement behavior help reduce the “installation lottery” that workshops hate.
Failure-risk reduction
We emphasize reducing the typical triggers of early failure: abnormal internal friction, misalignment symptoms, and inconsistent engagement under load.
Traceable, repeatable supply
For repeat buyers, batch-to-batch consistency is a business requirement. A stable specification approach helps distributors maintain trust with their downstream customers.
If you run a repair network, we can align on your internal acceptance checklist (noise tolerance, engagement feel, visual inspection points) so your team can receive goods with confidence.
While buyers rarely “see” the internal parts once installed, they can feel the result. A robust transmission is built like a system—structural integrity, controlled contact surfaces, and protection from corrosion during storage and shipping.
Housing integrity
The casing must support alignment and load distribution. Proper rigidity helps prevent abnormal vibration and wear.
Contact surface discipline
Gear contact and synchronizing behavior depend on controlled surfaces and stable assembly alignment—this is where smooth shifting is born.
Storage and transit protection
For B2B deliveries, protection is not cosmetic. It prevents moisture damage, contamination, and handling marks that lead to disputes at receiving.
In short: the gearbox should arrive clean, protected, and ready to be installed without additional “cleanup labor” at the warehouse or workshop.
B2B buyers need packaging that supports warehouse flow, not just product safety. A gearbox shipment should be easy to identify, handle, and store—especially for distributors managing mixed SKUs.
Packaging goals
Prevent shock damage during transit and reduce cosmetic disputes.
Support stable stacking or pallet handling where applicable.
Keep identification clear for receiving teams (product name, application, key codes).
Receiving-friendly practices
Clear labeling reduces receiving errors.
Consistent packing method reduces inspection time.
Protection against dust and moisture helps maintain installation readiness.
If you operate cross-border shipping, we can adapt packaging to your route risks (multi-transfer handling, port humidity, or long storage durations).
| Item | Specification |
| Product Name | Manual Transmission for Geely GX7 S148 S160G S160 |
| Vehicle Application | Geely GX7 |
| Transmission Codes | S148 / S160G / S160 |
| Product Type | Manual Transmission Assembly |
B2B purchasing often needs more than “one unit.” You may need mixed loads, consistent labeling, or packaging rules that match your warehouse process.
Mixed-model procurement planning (based on your monthly consumption)
Labeling approach aligned to your SKU system
Packaging adjustments for warehouse shelving or container loading
Documentation support for customs clearance workflows (when required)
A gearbox is a high-responsibility component. A reliable supplier supports you before and after shipment.
Pre-shipment confirmation workflow to reduce misorders
Batch consistency to support repeat purchasing
Clear communication cadence for lead time planning
Warranty and claim-handling process designed for distributors and repair networks
 | TOSEN Established in 2021, Shaoxing Tosen Auto Part Co.,Ltd. is located in Shaoxing city, Zhejiang Province, China, which mainly engaged in the investigation, research, sale and after market service of Engine, Transmission Gearbox, Differential Spread, Transmission Control Unit and Nitrogen Oxide Sensor. Our mission is to make some contributions to the World Auto Parts Industry. Our team has worked in auto spare parts for both cars and trucks for nearly twenty years and have a general investment of three million U S dollars. Besides, keeping pace with the world, we have been cooperating with a qualified supplier for some high-technology products like Nitrogen Oxide Sensor since 2018. With an area of more than 5, 5 0 0 m2, and a staff of 1 0 1, our cooperation factory dedicated to strict quality control and we are always available to discuss your requirements. In addition, we have obtained T U V and other certificates. Adhering to the business principle of mutual benefits and success, we have had a reliable reputation among our customers in markets like Germany, America, South Africa and some European countries. Follow the times, Change the world! We warmly welcome customers from both at home and abroad to establish cooperation and make joint efforts to create a bright future with us. If you have any new ideas or concepts for the products, please contact us. We are glad to work together with you and finally bring both of us a satisfied result. |
Focused on drivetrain parts: We work on engine, transmission gearbox, differential components, control units, and related aftermarket support—built around real replacement scenarios.
Experienced team background: Our team has long-term involvement in auto spare parts for cars and trucks, supporting practical sourcing and service expectations.
Quality control mindset: We prioritize consistent supply and careful handling, so your receiving team and workshop partners spend less time solving preventable issues.
B2B cooperation approach: We value mutual success—repeatable quality, stable communication, and a partnership model that supports long-term distribution.
1) How do I confirm whether my GX7 needs S148, S160G, or S160?
Start with the gearbox identification on the removed unit and cross-check with the service documentation used by your workshop. If you manage a distributor network, standardize a pre-check list so orders are consistent across branches. This reduces the most common B2B issue: ordering by vehicle name only.
2) Is this a full transmission assembly or partial components?
This listing is positioned as a manual transmission assembly for Geely GX7 applications. If you need internal components or associated drivetrain parts, share your procurement list and we can align your SKU plan to avoid fragmented sourcing.
3) What should our receiving inspection include?
We recommend a simple B2B receiving checklist: packaging integrity, label verification (vehicle + code), visual checks for handling impact, and confirmation of shipment completeness. This protects both sides and speeds up claims resolution if transit damage occurs.
4) Can you support distributor orders and recurring supply?
Yes. For repeat buyers, we can align on labeling logic, packaging method, and order cadence so your warehouse and sales teams can operate with fewer exceptions. Consistency is the real cost-saver at scale.
5) What information do you need for a fast quotation?
Provide the vehicle application (Geely GX7), the transmission code (S148/S160G/S160), target quantity, destination, and any packaging or labeling requirements. If you want to reduce mismatch risk further, include photos of the removed unit’s identification area and key interfaces.
A manual transmission should feel “mechanical” in the right way: a clean engagement, a confident gate, a smooth rotation without harsh vibration. This unit is designed to bring that sensation back to Geely GX7 drivetrains by focusing on the fundamentals B2B customers care about—fitment discipline, durability under real road loads, and stable shifting characteristics across daily stop-and-go and highway cruising.
From the first turn of the input shaft, a good gearbox has a certain tactile signature: rotation that feels even and controlled, not rough or inconsistent. That matters because the earliest signs of internal wear often show up as subtle drag, heat, or noise. A replacement transmission that restores smoothness does more than “work”—it reduces the risk of secondary failures (clutch stress, driver over-force, abnormal wear) and protects your reputation as a supplier or installer. This is why we treat a gearbox as a precision drivetrain assembly, not just a metal casing filled with gears.
Application-focused compatibility: Built for Geely GX7 fitment, aligned to S148 / S160G / S160 transmission codes to reduce mismatch risk.
Shift feel you can sense: Designed to restore crisp engagement and stable synchronization, supporting smoother gear changes and reduced shift hesitation.
Durability under load: Suitable for daily driving stress cycles—frequent starts, climbs, and variable torque demand—helping extend service intervals.
Noise and vibration control mindset: Built to support controlled operation that helps minimize abnormal drivetrain noise and harshness after installation.
B2B-friendly supply approach: Supports wholesalers, repair networks, and importers that need consistent batches, packaging stability, and clear identification.
Selecting a manual transmission is not just “vehicle model + year.” In B2B purchasing, most returns and disputes come from incomplete fitment confirmation. To protect your order accuracy, we recommend validating the following before shipment:
Transmission code confirmation
Confirm the vehicle uses S148, S160G, or S160 configuration.
Cross-check the gearbox identification area or the service documentation used by your workshop network.
Vehicle platform check
Confirm the application is Geely GX7 and note any market-specific variations that may affect mounting points or linkage interfaces.
Installation system compatibility
Ensure linkage, mounts, clutch system components, and driveshaft interfaces are consistent with the removed unit.
If your buyer is a workshop chain, standardize a short “pre-check list” to reduce inconsistent field verification.
Why this matters to you: Every avoided mismatch saves shipping cost, admin time, and customer friction. In many markets, preventing just one incorrect shipment pays for a full round of fitment validation.
A gearbox is trusted when it behaves consistently, not only on day one, but after the first heat cycles and real torque loading. For B2B buyers, “quality” is measurable in reduced warranty claims, fewer noise complaints, and stable shifting over time. Our quality mindset focuses on three practical outcomes:
Operational consistency
Smooth rotation characteristics and stable engagement behavior help reduce the “installation lottery” that workshops hate.
Failure-risk reduction
We emphasize reducing the typical triggers of early failure: abnormal internal friction, misalignment symptoms, and inconsistent engagement under load.
Traceable, repeatable supply
For repeat buyers, batch-to-batch consistency is a business requirement. A stable specification approach helps distributors maintain trust with their downstream customers.
If you run a repair network, we can align on your internal acceptance checklist (noise tolerance, engagement feel, visual inspection points) so your team can receive goods with confidence.
While buyers rarely “see” the internal parts once installed, they can feel the result. A robust transmission is built like a system—structural integrity, controlled contact surfaces, and protection from corrosion during storage and shipping.
Housing integrity
The casing must support alignment and load distribution. Proper rigidity helps prevent abnormal vibration and wear.
Contact surface discipline
Gear contact and synchronizing behavior depend on controlled surfaces and stable assembly alignment—this is where smooth shifting is born.
Storage and transit protection
For B2B deliveries, protection is not cosmetic. It prevents moisture damage, contamination, and handling marks that lead to disputes at receiving.
In short: the gearbox should arrive clean, protected, and ready to be installed without additional “cleanup labor” at the warehouse or workshop.
B2B buyers need packaging that supports warehouse flow, not just product safety. A gearbox shipment should be easy to identify, handle, and store—especially for distributors managing mixed SKUs.
Packaging goals
Prevent shock damage during transit and reduce cosmetic disputes.
Support stable stacking or pallet handling where applicable.
Keep identification clear for receiving teams (product name, application, key codes).
Receiving-friendly practices
Clear labeling reduces receiving errors.
Consistent packing method reduces inspection time.
Protection against dust and moisture helps maintain installation readiness.
If you operate cross-border shipping, we can adapt packaging to your route risks (multi-transfer handling, port humidity, or long storage durations).
| Item | Specification |
| Product Name | Manual Transmission for Geely GX7 S148 S160G S160 |
| Vehicle Application | Geely GX7 |
| Transmission Codes | S148 / S160G / S160 |
| Product Type | Manual Transmission Assembly |
B2B purchasing often needs more than “one unit.” You may need mixed loads, consistent labeling, or packaging rules that match your warehouse process.
Mixed-model procurement planning (based on your monthly consumption)
Labeling approach aligned to your SKU system
Packaging adjustments for warehouse shelving or container loading
Documentation support for customs clearance workflows (when required)
A gearbox is a high-responsibility component. A reliable supplier supports you before and after shipment.
Pre-shipment confirmation workflow to reduce misorders
Batch consistency to support repeat purchasing
Clear communication cadence for lead time planning
Warranty and claim-handling process designed for distributors and repair networks
| TOSEN Established in 2021, Shaoxing Tosen Auto Part Co.,Ltd. is located in Shaoxing city, Zhejiang Province, China, which mainly engaged in the investigation, research, sale and after market service of Engine, Transmission Gearbox, Differential Spread, Transmission Control Unit and Nitrogen Oxide Sensor. Our mission is to make some contributions to the World Auto Parts Industry. Our team has worked in auto spare parts for both cars and trucks for nearly twenty years and have a general investment of three million U S dollars. Besides, keeping pace with the world, we have been cooperating with a qualified supplier for some high-technology products like Nitrogen Oxide Sensor since 2018. With an area of more than 5, 5 0 0 m2, and a staff of 1 0 1, our cooperation factory dedicated to strict quality control and we are always available to discuss your requirements. In addition, we have obtained T U V and other certificates. Adhering to the business principle of mutual benefits and success, we have had a reliable reputation among our customers in markets like Germany, America, South Africa and some European countries. Follow the times, Change the world! We warmly welcome customers from both at home and abroad to establish cooperation and make joint efforts to create a bright future with us. If you have any new ideas or concepts for the products, please contact us. We are glad to work together with you and finally bring both of us a satisfied result. |
Focused on drivetrain parts: We work on engine, transmission gearbox, differential components, control units, and related aftermarket support—built around real replacement scenarios.
Experienced team background: Our team has long-term involvement in auto spare parts for cars and trucks, supporting practical sourcing and service expectations.
Quality control mindset: We prioritize consistent supply and careful handling, so your receiving team and workshop partners spend less time solving preventable issues.
B2B cooperation approach: We value mutual success—repeatable quality, stable communication, and a partnership model that supports long-term distribution.
1) How do I confirm whether my GX7 needs S148, S160G, or S160?
Start with the gearbox identification on the removed unit and cross-check with the service documentation used by your workshop. If you manage a distributor network, standardize a pre-check list so orders are consistent across branches. This reduces the most common B2B issue: ordering by vehicle name only.
2) Is this a full transmission assembly or partial components?
This listing is positioned as a manual transmission assembly for Geely GX7 applications. If you need internal components or associated drivetrain parts, share your procurement list and we can align your SKU plan to avoid fragmented sourcing.
3) What should our receiving inspection include?
We recommend a simple B2B receiving checklist: packaging integrity, label verification (vehicle + code), visual checks for handling impact, and confirmation of shipment completeness. This protects both sides and speeds up claims resolution if transit damage occurs.
4) Can you support distributor orders and recurring supply?
Yes. For repeat buyers, we can align on labeling logic, packaging method, and order cadence so your warehouse and sales teams can operate with fewer exceptions. Consistency is the real cost-saver at scale.
5) What information do you need for a fast quotation?
Provide the vehicle application (Geely GX7), the transmission code (S148/S160G/S160), target quantity, destination, and any packaging or labeling requirements. If you want to reduce mismatch risk further, include photos of the removed unit’s identification area and key interfaces.
