Before using this product, you should strictly abide by the requirements and regulations of this manual for use and maintenance.
Before installing the machine, please check the specifications of the machine, assemble the accessories of each system, and check whether the original machine accessories are installed and adjusted correctly. Mixing, wrong and missing are not allowed.
Please use cleaning agent and high pressure air gun to clean the intake/exhaust manifold before installation. After the assembly is completed, WARNING! Before starting the new machine, the ignition timing and valve clearance must be adjusted! According to the regulations of the new gasoline engine, add standard (new gasoline engine oil); and add enough coolant. Check whether the circuit system is normal, and the gasoline engine can be started only after the adjustment is completed.
When using a new gasoline engine, it must be adjusted and run-in (800r/min, run-in for 60 minutes) or run-in period (within 1000 kilometers of the run-in period).
When starting the new engine, it is strictly forbidden to step on the accelerator or increase the accelerator to avoid the high-speed operation of the engine. During the early run-in period, heavy load and overload work operation is strictly prohibited. (Because the lubricating oil, the fit between the connectors, etc. have not reached the normal matching state). Avoid working under low oil pressure or abnormal conditions.
The new engine is not allowed to stop suddenly when running at high speed and high load. It should run for 2-3 minutes at low speed before stopping.
The new engine is strictly prohibited from running without oil, water and high temperature.
